Beam Design Tank Container - General Specifications General Arrangement Diagram  (pdf file format) D I M E N S I O N S Container Length 20' Container Length 6.1 m Container Width 8' Container Width 2.4 m Container Height 8'6" Container Height 2.6 m W E I G H T S Tare 8378 lbs Tare 3800 kg Max. Gross 79366 lbs Max. Gross 36000 kg Payload 70988 lbs Payload 32200 kg Stack Test 423290 lbs Stack Test 192000 kg P R E S S U R E Tank Operating 58 psi Tank Operating 4 bar Tank Test 87 psi Tank Test 6 bar Steam Operating 145 psi Steam Operating 10 bar Steam Test 218 psi Steam Test 15 bar Vacuum 6" hg Vacuum 152 mm hg C A P A C I T I E S Capacity (US Gallons) 6380 Capacity (Liters) 24000 O U T L E T S Bottom 3" Bottom 76 mm Fort Vale "Marsden" Type internal valve with butterfly valve and threaded NPT cap. Top Unloading (Provision) 3" Top Unloading (Provision) 76 mm Specifications subject to change without notice. Other configurations available. O T H E R Tank shell made of 316L cold rolled, 2B finished stainless steel. Tank heads made of 316L hot rolled stainless polished to 180 grit finish. Frame material painted with VOC compliant zinc rich epoxy primer and polyurethane topcoat. Steam channels are 65 ft2 (6 m2) with safety relief valve. Insulation 2" - 4" (50 - 100 mm) covered by prepainted marine grade aluminum. Eight point manway equipped with safety bolt. Top spillboxes are equipped with lids. Emergency bottom outlet closure cable located on both sides of tank. Full length aluminum non-slip, gripstrut walkway with a provision for removable hand rails. CERTIFICATIONS: Type 1, ADR/RID, IMO, ISO, US DOT, AAR/FRA, CSC, UIC,TC. Other Types available upon request.