Full Frame Design Tank Container - General Specifications General Arrangement Diagram (pdf file format) D I M E N S I O N S Container Length 20' Container Length 6.1 m Container Width 8' Container Width 2.4 m Container Height 8'6" Container Height 2.6 m W E I G H T S Tare 8800 - 9400 lbs Tare 4400 - 4265 kg Max. Gross 67196 - 79366 lbs Max. Gross 30480 - 36000 kg Payload 57796 - 70566 lbs Payload 26215 - 32000kg Stack Test 423290 lbs Stack Test 192000 kg P R E S S U R E Tank Operating 14.5 psi Tank Operating 1 bar Tank Test 21.75 psi Tank Test 6 bar Steam Operating 87 - 145 psi Steam Operating 6 - 10 bar Steam Test 130 -218 psi Steam Test 9 -15 bar Vacuum 6"  hg Vacuum 152 mm hg C A P A C I T I E S Capacity (US Gallons) 4644 - 6380 Capacity (Liters) 17500 - 24000 O U T L E T S Bottom 3" Bottom 76 mm Fort Vale Cleanflow Type (steam heated) internal valve, butterfly valve & threaded NPT cap. Top Unloading (Provision) 3" Top Unloading (Provision) 75 mm Top Air 1" Top Air 25 mm Dual Connections (NPT & BSP) - with express coupler. Specifications subject to change without notice. Other configurations available. O T H E R Tank shell made of 316L cold rolled, 2B finished stainless steel. Tank heads made of 316L hot rolled stainless polished to 180 grit finish. Frame material painted with VOC compliant zinc rich epoxy primer and polyurethane topcoat. Steam channels are 50 - 80 ft2 (5 - 7.5 m2) actual contact area with safety relief valve. Insulation 2" - 4" (50 - 100 mm) covered by prepainted marine grade aluminum. Eight point manway equipped with safety bolt. Top spillboxes are equipped with lids. Emergency bottom outlet closure cable located on both sides of tank. Full length aluminum non-slip, gripstrut walkway with a provision for removable hand rails. CERTIFICATIONS: Type 1, ADR/RID, IMO, ISO, US DOT, AAR/FRA, CSC, UIC,TC. Type 5 & US DOT SPEC 51 also available. Other Types available upon request.